| Обозначение | Заглавие на русском языке | Статус | Язык документа | Цена (с НДС 20%)
в рублях |
|
|
Measurement of quartz crystal unit parameters - Part 9: Measurement of spurious resonance of piezoelectric crystal units
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Measurement of quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Laboratory resistors - Part 2:Laboratory a.c. resistors
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Laboratory resistors - Laboratory d.c. resistors
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Guide to dynamic measurements of piezoelectric ceramics with high electromechanical coupling
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm(0.1 in) with common mounting features
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 3:Two-part connectors for printed boards having contacts spaced at 2.54 mm(0.100 in) centres and staggered terminations at that same spacing
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Connectors for frequencies below 3MHz for use with printed boards - Part 4:Two-part connectors for printed boards having contacts spaced at 1.91 mm(0.075 in) centres and staggered terminations at that same spacing
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm(0.1 in) spacing
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge-socket connectors and printed-board connectors with 2.54 mm(0.1 in) contact spacing for single or double-sided printed boards of 1.6 mm(0.063 in) nominal thickness
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 7:Detail specification for connectors, 8 - way, including fixed and free connectors with common mating features, with assessed quality
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 10: Two-part connectors for printed boards for basic grid of 2.54 mm (0.1 in), inverted type
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Piezoelectric ceramic resonator units - Part 2: Guide to the use of piezoelectric ceramic resonator units
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Piezoelectric ceramic resonators - Part 3:Standard outlines
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Piezoelectric ceramic resonators and resonator units for frequency control and selection - Chapter I: Standard values and conditions - Chapter II: Measuring and test conditions
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Piezoelectric, dielectric and electrostatic oscillators of assessed quality – Part 1: Generic specification
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
| Страницы: ... / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 ... / 28 |